亚洲色偷偷综合亚洲AV伊人蜜桃_最近免费看av_国产人妻午夜在线无码_国语FREE性XXXXXHD_高清做爰免费无遮网站挡_国产精品呻吟AV久久高潮

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

servo cylinder Sold to The Philippines

Release time:2023-11-24 08:39:26 Hits: Current position: Home > News

This article mainly introduces:

The Philippines hydraulic cylinder,servo cylinder manufacturer,servo cylinder

The Philippines servo cylinder

(The Philippines servo cylinder,produced by Hebei Hengyu company)

servo cylinder are widely used in The Philippines,because of no transmission clearance,clever hydraulic energy conversion,long service life.So our company has designed servo cylinder for customers from The Philippines.

Introduction to servo cylinder:

1, the hydraulic machinery should be kept clean, in order to prevent dust and debris from falling into the oil, the tank should be sealed. 2, the oil in the tank should be replaced regularly according to the working condition. When changing the oil, the dirt and impurities accumulated at the bottom of the tank should be removed and the tank should be cleaned. 3, hydraulic oil, oil drums should be set in a clean and safe place to strengthen management. The oil drum, oil filter, oil funnel, oil pipe, etc. used should be kept clean. The oil drums for loading hydraulic oil must be cleaned in advance, and the oil drums should be dedicated and not mixed with other oil drums.

In the hydraulic system, sometimes the inner layer of the rubber hose is peeled off, so that the oil circuit is on and off, resulting in irregular servo cylinder action. Troubleshooting method: Replace the rubber hose.

The servo cylinder is mainly composed of body, piston, piston rod, servo cylinder head, servo cylinder bottom, piston rod head and related auxiliary devices. The piston divides the servo cylinder into two chambers, and moves reciprocally in the servo cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the servo cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the servo cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the servo cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the servo cylinder bottom and the servo cylinder head is serious, so the buffer deceleration should be set at both ends of the servo cylinder The working medium of the servo cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; servo cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the servo cylinder: The buffer structure of the servo cylinder is to prevent the piston from colliding with the servo cylinder head at the end of the stroke.

When producing oil servo cylinders, there are two processing processes, grinding and rolling, the latter is better than the former. Rolling machining is a kind of non-cutting machining, using the plastic deformation of the metal at room temperature, so that the micro roughness of the workpiece surface is flattened to achieve the purpose of changing the surface structure, mechanical characteristics, shape and size. Therefore, this method can achieve the two purposes of finishing and strengthening at the same time, which can not be done by grinding.

Answers to some questions about servo cylinder:

How do hydraulic equipment and hydraulic cylinders maintain a certain pressure after pressing to a certain position?
There are several methods. 1. You can use a constant pressure variable pump to adjust the control pressure of the pump to the pressure required by the cylinder, so that when the cylinder is in place, the pump uses the minimum flow rate to maintain the pressure, and the system is more energy saving. 2. If the pressure is maintained for a short time, a hydraulic control check valve can be added to the oil inlet end of the cylinder to close the cylinder and maintain the pressure. If the volume of the cylinder is large, an accumulator can be added between the valve and the cylinder to maintain pressure for 10-30 minutes. 3. You can add a small flow pump, the large pump after unloading, the small pump has been running, specifically for maintaining pressure.

The hydraulic cylinder is slow when moving forward and faster when moving back.
If the cylinder is single, it is slow when it is moving forward without the rod cavity, and fast when it is shrinking.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
主站蜘蛛池模板: 国产精品人妻无码久久久免费看 | 日本三级黄在线观看 | 青青草原亚洲 | 亚洲精品乱码久久久久久中文字幕 | JAPANESE少妇高潮潮喷 | 亚洲A∨精品无码一区二区 亚洲精品一区二区三区精品 | 欧美粗大猛烈老熟妇 | 少妇对白露脸打电话系列 | 国产精品自在线拍国产手青青机版 | 在线观看免费视频网站 | 免费黄色观看 | 亚洲国产午夜精品理论片妓女 | 久久久久国产精品无码免费看 | 亚洲精品成AV人片天堂无码 | 免费放黄网站在线播放 | JiZZJiZZ成熟丰满熟妇 | 欧美日韩视频免费 | 人人人妻人人澡人人爽欧美一区 | 丰满少妇人妻无码专区 | 成人午夜特黄aaaaa片男男 | 视频网站无码专区遭暴露 | 亚洲人成伊人成综合网小说 | 日韩精品久久久久久免费 | 俄罗斯胖老太牲交 | 在线播放无码后入内射少妇 | 我和岳在厨房里做中文字幕 | 狠狠婷 | 美美女高清毛片视频免费观看 | 艳妇乳肉豪妇荡乳 | www.四虎在线观看 | 四虎影院永久在线观看 | 皇上从小侵犯双性太子NP高H | 中文字幕亚洲欧美日韩在线不卡 | 最近2019年日本中文免费字幕 | 最近的2019中文字幕免费一页 | 黑色蕾丝丝袜麻麻好紧好爽 | 亚洲人成绝费网站色WWW | 中文字幕乱码日韩 | 日本熟妇色XXXXX日本老妇 | 国产人妻熟女在线观看 | 亚洲中文无码av永久伊人 |