亚洲色偷偷综合亚洲AV伊人蜜桃_最近免费看av_国产人妻午夜在线无码_国语FREE性XXXXXHD_高清做爰免费无遮网站挡_国产精品呻吟AV久久高潮

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tailboard balance cylinder Sold to Pakistan

Release time:2023-11-12 14:24:38 Hits: Current position: Home > News

This article mainly introduces:

Pakistan hydraulic cylinder,tailboard balance cylinder manufacturer,tailboard balance cylinder

Pakistan tailboard balance cylinder

(Pakistan tailboard balance cylinder,produced by Hengyu Hydraulic Cylinder Factory)

tailboard balance cylinder are widely used in Pakistan,because of high work efficiency,excellent fatigue and impact resistance,no need for deceleration device.So our company has designed tailboard balance cylinder for customers from Pakistan.

Introduction to tailboard balance cylinder:

The tailboard balance cylinder is mainly composed of body, piston, piston rod, tailboard balance cylinder head, tailboard balance cylinder bottom, piston rod head and related auxiliary devices. The piston divides the tailboard balance cylinder into two chambers, and moves reciprocally in the tailboard balance cylinder with the help of pressure oil. In order to improve its working effect, there is no sealing ring on the piston to eliminate internal leakage, where the piston rod passes through the tailboard balance cylinder head, due to the existence of the gap, it is easy to produce external leakage phenomenon, and the dust can enter the tailboard balance cylinder through the gap, so the sealing device and dust prevention reason are set. At the same time, in order to eliminate the influence of eccentric load on the work of the piston, all the tailboard balance cylinders must be provided with a considerable length of guide sleeve at the extended end of the piston rod. In addition, in the case of faster piston movement, the phenomenon of mechanical collision between the piston and the tailboard balance cylinder bottom and the tailboard balance cylinder head is serious, so the buffer deceleration should be set at both ends of the tailboard balance cylinder The working medium of the tailboard balance cylinder: because it works at room temperature, the ordinary oil-type hydraulic oil can be selected; tailboard balance cylinder sealing device: The use of Yx sealing ring, polyurethane (PU) and polytetrafluoroethylene (PTFE) materials combined to achieve a good sealing effect; Buffer mechanism of the tailboard balance cylinder: The buffer structure of the tailboard balance cylinder is to prevent the piston from colliding with the tailboard balance cylinder head at the end of the stroke.

The difference between the plunger tailboard balance cylinder and the piston tailboard balance cylinder is that the piston in the tailboard balance cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type tailboard balance cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

When using the tailboard balance cylinder product, be sure to operate safely in accordance with the specification documents provided by the manufacturer, and pay attention to protecting the tailboard balance cylinder block. If the tailboard balance cylinder block is damaged, it will cause adverse consequences: ① The material debris extruded from the scratch groove will be embedded in the seal, which may cause new scratch area marks while damaging the working parts of the seal during operation. ② Deterioration of the surface roughness of the inner wall of the tailboard balance cylinder, increase friction, easy to produce crawling phenomenon. ③ Increase the internal leakage of the tailboard balance cylinder, so that the working efficiency of the tailboard balance cylinder is reduced.

The tailboard balance cylinder pipe should not be left behind when deburring at both ends after the fixed length processing. In addition, the placement of steel pipes near the site of welding pipeline operations is the cause of welding foreign objects. The pipes placed near the welding operation site should be sealed. It must also be noted that pipe fitting materials should be fully prepared on a dust-free workbench.

Answers to some questions about tailboard balance cylinder:

How to calculate hydraulic cylinder flow?
Effective area of the cylinder x stroke = volume usually in liters. Volume/estimated total travel time (converted to minutes) = oil flow rate.

How big is the motor and oil pump for the 80 cylinder?
Pump motor selection is not only related to cylinder diameter but also speed system, it is recommended to provide system diagram and speed requirements, generally speaking, most of the 80 cylinder on the market is equipped with 3-4KW motor, 10-20 oil pump.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
主站蜘蛛池模板: 国产成人AV综合久久视色 | 国产一区二区色 | 精品人妻VA出轨中文字幕 | 在线亚洲精品国产二区图片欧美 | 强奷漂亮的女邻居中文字幕 | 东北老头嫖妓猛对白精彩 | 又色又爽又黄高潮的免费视频 | 高清国产一区二区三区在线 | 麻豆av高清 | 欧洲女人与公拘交酡视频 | 亚洲精品av一二三区无码 | 久久国产人妻无码一区 | 欧美人与动牲交XXXXBBBB免费 | 末成年ASS浓精PICS | 亚洲一线二线三线AV无码 | 国产日屁 | chinese熟女熟妇2乱 | 潮喷女王高潮喷水一次看个够 | 一色桃子av一区二区 | 成熟人妻换╳╳╳╳ | 欧美黑人又粗又大XXXX | 色偷一区国产精品 | 精品人妻无码专区中文字幕 | 熟女系列丰满熟妇AV | 亚洲一区二区网址 | 99精品久久久久中文字幕 | 波多野42部无码喷潮在线 | 97在线视频免费人妻 | 色欲精品国产一区二区三区AV | 偷窥xxxx盗摄国产 | 国产人与动牲交 | 中文字幕一区二区三区视频 | 日韩综合无码一区二区 | 一本久道高清无码视频 | 成人黄网站片免费视频软件 | 无码精品人妻一区二区三区aV | 四虎国产精品永久在线动漫 | "a级毛片 黄" | 日韩精品无码人成视频 | 亚洲人成综合网站7777香蕉 | 女人一级黄色片 |